UnoDrive™
Stepper Motor Driver
Full & Half Step, 40V 1.2A
UnoDrive™
Stepper Motor Driver
Full & Half Step, 40V 1.2A
| FEATURES:
|
 |
The UnoDrive is a constant current stepper motor driver.
It receives step and direction signals from the controller and can drive motors
with up to 40 volts to maximize the high speed performance. The UnoDrive can
be used in conjunction with our OptiStep
Plus, MN100
or MN400
motion controllers or with any controller capable of producing TTL compatible
step and direction signals.
SPECIFICATIONS:
| Drive circuit | Constant current bipolar chopper |
| Chopping rate | 20 KHz nominal |
| Operating voltage range | 12 ~ 40 VDC |
| Output Current | Resistor selectable |
| Stepping Modes | Half / Full step jumper selectable |
| Current cutback | Automatic after one second of idle |
| Step input signal | TTL compatible positive edge trigger |
| Direction input signal | TTL compatible positive edge trigger |
| Fault and Home output signals | Open collector type (50 mA max sink) |
| Motor control outputs | 4 current mode chopper lines per axis |
| Current capability | 1.2 Amps maximum |
| Physical dimensions | 4.00" w × 2.325" d × 1.23" h |
| Working temperature range | 32° F ~ 158° F (0° C ~ 70° C) |
| Warranty | Five years parts and labor |
|
|
|
|
|
|
|
|
|
|
|
|