Bridgeport XY Kit
The Bridgeport XY CNC retrofit kit includes the mechanical components needed to convert the X and Y axes of your manual Bridgeport, Jet, Enco or most any similar J-head type mill for CNC operation. All components are precision engineered. The kit includes (2) Size 42 motor mounting plates, (2) motor pulleys, (2) lead screw pulleys, (2) motor covers, (2) drive belts, and all required bolts, dowels, and spacers. For use with NEMA 42 size motors.(order separately).
|
|
|
|
|
|
|
|
CNC Bridgeport Knee Conversion Kit
|
The Bridgeport Knee CNC retrofit kit includes the mechanical components needed to automate the knee of a manual Bridgeport, Jet, Enco or most any similar type milling machine for motorized control. All components are precision engineered. Kit includes a size NEMA 42 motor mounting plate, motor pulleys, lead screw pulley, motor cover, drive belt, and all required bolts, dowels, and spacers. For use with NEMA 42 size motors.(order separately).
|
|
|
|
|
|
|
NEW Improved Design!
Bridgeport Quill Kit
|
The Bridgeport CNC Quill retrofit kit includes the mechanical components needed to convert the Z axis of your manual Bridgeport or Enco mill for CNC operation. All components are precision engineered and include the quill feed drive frame w/ size 34 motor mount, the ball screw and ball nut assembly, the motor and ball screw pulleys, the motor cover, and all needed bolts, dowels, and spacers. Ideally suited for use with the 34HT1275 motor (Order separately).
|
|
|
|
|
|
|
High Performance Ballscrew Kit
Upgrade your Bridgeport series 1 style knee mill with this precision-rolled ballscrew kit. The screw and nut assemblies are made of hardened steel for durability and long life. This ballscrew kit will provide a load life expectancy of 50 million inches of travel at an operating load of 400 pounds. The many advantages in this design over other products on the market include:
• Accuracy of +/-.003" per foot
• Preloaded Ball Nuts- Each ball nut is preloaded to eliminate lost motion. This system stiffness provides faster response from a control command. This added stiffness also allows heavier cuts and climb milling thus increasing productivity. The preload is adjustable. This feature permits readjustment for wear and reduces the need for repair or future replacement.
• Brush-Type Wipers: Brush-type wipers, at the ends of each preloaded ball nut assembly, prevent entry of dirt and metal chips
• Easy-Access Lubrication:
Lubrication of ball nuts made easy through 5/32" holes in the flanges. These
holes provide for attachment of existing lube tubing. Available lengths for the X axis are:
36", 42", 48" and for the Y axis: 9", 12", and 16".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable Spindle Speed Kit, 2 and 3 HP
The Variable Spindle Speed kit includes the cabinet that mounts to the mill, a 2 or 3 HP VFD, emergency stop, variable speed control and electronic display as well as the necessary mounting hardware.
|
|
|
|
|
|
|
|
|
|
|
CNC Rack-Mount Control Systems for Full-Size Machines
A complete pre-engineered package to automate your full-size Bridgeport, Enco, or similar size knee mill. Just couple the motor shafts to your machine's drive screws, plug in the cables, turn on the power, and install the software. You can immediately jog the motors by pressing Ctrl-J, and clicking on the X+, X-, Y+, Y-, Z+, and Z- buttons! It's literally that easy! You can write simple part programs as well as use the built in wizards screens to generate programs for pockets and bolt hole circles. The drill holes can be simple down/up or with chip break cycles, chip clearing cycles etc... You can also use your favorite CAM program to generate complex 3D simultaneous surfacing machining tool paths. This same controller can also be used to automate a lathe. You would just use the TurnMaster Pro software. The 3 Axis version would also be able to control a tool turret. A tower orientation is available on request.
SYSTEM
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|